RexTheRoadDog
Does it ever kick back? Is your compression high? Thre are a few other people that have had this happen. I did a little research and you might find this interesting...http://www.hdforums.com/forum/dyna-glide-models/536183-ring-gear-and-starter-trouble.html
SnakechrmrThanks, Rex, this looks like my problem to a "T". Only my bike had about 80,000 miles on it before the problem. Had the clutch housing replaced a few months ago but the problem is starting again. I'm thinking it'll be the last time I pay a mechanic to... moreThanks, Rex, this looks like my problem to a "T". Only my bike had about 80,000 miles on it before the problem. Had the clutch housing replaced a few months ago but the problem is starting again. I'm thinking it'll be the last time I pay a mechanic to work on her instead of me. My new part time home will probably be the website.
SnakechrmrThis might hurt a little but; Not sure how much they outsource but they do out source to Jap companies. All their forks are metric from Shoei. My bike is an '07 and you need metric wrenches to work on some things. When changing break pads the maint... moreThis might hurt a little but; Not sure how much they outsource but they do out source to Jap companies. All their forks are metric from Shoei. My bike is an '07 and you need metric wrenches to work on some things. When changing break pads the maint manual says 10mm wrench. And when removing the axle cap to remove the front wheel the allen screws are metric. A mechanic stripped the heads using inch allen wrenches just before I started changing my own tires.
November 4, 2016- -
-
Report
November 4, 2016- -
-
1 likes this
- -
-
Report
November 4, 2016- -
-
Report
November 4, 2016- -
-
1 likes this
- -
-
Report